Spot the Draught Proofing: Beautiful Sash Windows, Sealed and Invisible
Spot the Draught Proofing: Beautiful Sash Windows, Sealed and Invisible
We love it when customers send us photos of their finished windows, and this week's arrived from across the Tasman. A customer in New Zealand has fitted our Draught Seal Stop Beads and Draught Seal Parting Beads to the double hung sash windows of their home, and the results are lovely. Freshly painted white joinery, a view out over the veranda to the garden, and sashes that slide shut like they did when the house was new.
So here's our challenge to you: can you see the draught proofing?


Take your time. Look along the sides of the frame. Look at the line between the two sashes. Look down at the sill.
No, you can't. And that's exactly the point. Once our draught seal beading is installed, the brush seal sits inside the timber bead, tucked against the sash. It becomes part of the window, and it's invisible to the eye.
Watch It Shut
Photos only tell half the story, so our customer sent a video too. Watch the bottom sash slide down and close. It runs smoothly, it closes snugly, and it's quiet. No rattle, no knock, no wobble in the frame. Just a soft, solid close.
That quiet close is the draught proofing doing its job. The brush seals hold the sash gently in place on every side, so it isn't loose in the frame. That's what stops the rattles, and it's what keeps the draughts, dust and road noise outside where they belong.
Where Is It, Then?
Every timber double hung sash window has two kinds of bead holding the sashes in place. Our customer swapped both for draught seal versions:
- Stop beads (also called staff beads) run around the inside of the frame and hold the bottom sash in. Ours have a brush seal fitted into the face of the bead, which presses gently against the inside of the bottom sash.
- Parting beads sit in a groove between the top and bottom sashes and keep them running in their own tracks. Ours have the brush fitted along the edge, sealing the gap between the sash and the frame.
From the room, all you see is a neat timber bead, painted to match the rest of the window, exactly like the original. The brush is out of sight between the bead and the sash. If you've read The Sashie Files, Part 3, you'll know that's exactly why we designed our beading this way: the heritage look stays, the draughts go.
Why It Disappears
A lot of draught proofing is stuck on, screwed on or tacked over the top of the window, and you can see it from across the room. Ours is different, because the seal is built into a bead that the window already has.
Draught Seal Stop Bead
- 22mm or 30mm wide, 18mm deep
- Brush already fitted, at no extra cost
- Replaces your existing stop bead
Draught Seal Parting Bead
- 25mm x 8mm
- Brush already fitted, at no extra cost
- Keeps the sashes running true
Both are solid FSC certified timber in full lengths, with no finger joints, and made in Australia to our own specification. They come primed and ready to paint, so they finish exactly like the rest of the joinery, just like our customer's crisp white windows.
And because the seal is a brush with a central fin rather than a rubber compression seal, the sash still slides freely. A compression seal drags on a moving sash and wears out fast. We've explained why in Compression Seals vs Brush Seals: Myths Debunked.
Want Windows Like These?
If your sash windows rattle, let the draughts in, or let the street noise in, this is a job you can do yourself, ideally while the sashes are out for re-cording or painting.
- Work out how much beading you need with our Beading Calculator.
- Follow our step by step guide to draught proofing a double hung sash window.
- Or grab a DIY Draught Seal Kit, which has everything you need for one window.
Delivered right across Australia. We deliver our draught proofing products Australia wide. Questions about shipping? Contact us or call 02 7228 0625.
Frequently Asked Questions
Can you see draught seal beading once it's installed?
No. The brush seal sits between the timber bead and the sash, so from inside the room you only see a plain timber bead, painted to match the window. It looks just like the original beading.
Will draught proofing stop my sash windows rattling?
Yes. The brush seals hold the sash gently on each side, so it no longer moves around loose in the frame. That's what stops the rattles and makes the window close quietly.
Does draught proofing make sash windows hard to open?
Not with a brush seal. The brush and central fin let the sash slide freely while still blocking air, which is why we use brush seals rather than compression seals on sliding sash windows.
What's the difference between a stop bead and a parting bead?
The stop bead (or staff bead) runs around the inside of the frame and holds the bottom sash in. The parting bead sits between the top and bottom sashes and keeps them in their own tracks. To draught proof a double hung window properly, you replace both.
Can I paint draught seal beading?
Yes. Our beads come primed, ready to paint to match your window. Just keep paint off the brush itself.
Thank you to our New Zealand customer for sending these in. Got finished windows you're proud of? We'd love to see them. Send your photos to us, or call us on 02 7228 0625 if you have a question about your own sash windows.
Leave a comment