Evermend Epoxy Wood Repair: 1 Hour Cartridge

Evermend Epoxy Wood Repair: 1 Hour Cartridge

Name: Evermend Epoxy Wood Repair: 1 Hour Cartridge
Brand: Lock and Latch
SKU: 7001
Price: 74.99 AUD
Availability: InStock

Price

Save

Made in the UKStocked in Sydney and shipped Australia-wide

A fast-curing two-part epoxy for permanent timber repairs. It bonds into the wood, then you can shape, sand and paint it within the hour.

Cure time

1 HourYou're viewing4 HourMore working time

Won't shrink or crack
Non-sag, works overhead
Sand, drill, screw and paint
Fits a twin cartridge gun

Quantity

You'll also need

Twin Cartridge Extrusion GunRequired for cartridges · $79.99
+ Add to cart

Epoxy Wood StabiliserPrepares the timber · $49.99
+ Add to cart

Buying for a job? Bulk up and save

One click adds a pack of 1 Hour cartridges to your cart.

Buy 5$329$65.80 eachSave $45.95 Buy 10$619$61.90 eachSave $130.90 Best valueBuy 20$1,099$54.95 eachSave $400.80

Need a gun or stabiliser too? See all saver packs and bundles.

Delivery Australia-wideShipping calculated at checkout

Free pick-up in Warriewood, SydneyWe'll message you the address when it's ready

Questions? 02 7228 0625Talk to us about your repair

1 hrCure time50 to 60 minutes at 20°C

5 minWorking timeAt 20°C

1:1Mix ratioMeasured out by the gun

400cm³Per cartridgeCream colour

Why Evermend

A permanent repair, not a patch

Evermend is a two-part epoxy that bonds into the wood fibre, restoring the surface and the strength of damaged or rotten timber. It's a lasting alternative to cutting out and replacing sound original joinery.

Bonds into the wood

A structural bond, not just a surface fill.

Moves with the timber

Won't shrink, crack or absorb moisture.

Non-sag

Stays put on vertical and overhead repairs.

Work it like timber

Sand, drill, nail, screw and paint once cured.

How it compares: epoxy vs wood filler

1 Hour or 4 Hour?

Pick the cure time to suit the job

Same Evermend epoxy and the same gun. The difference is how long you have to work with it.

You're viewing Evermend Epoxy Wood Repair: 1 Hour Cartridge

1 Hour Cure

Fast cure. Shape, sand and paint the same day. Great for spot repairs, splits and quick jobs.

Other option

Evermend Epoxy Wood Repair: 4 Hour Cartridge

4 Hour Cure

Slower cure, so you have more time to work the filler before it sets.

View the 4 Hour Cure →

How to use it

Prepare, mix, apply

Full instructions are below, and we're happy to talk you through your first repair.

Prepare the timber

Cut out all soft, loose and rotten wood, then clear the dust. Brush on Evermend Stabiliser to seal and strengthen the timber.

Mix

Extrude onto a mixing board and fold together until it's streak-free. Only mix what you can use in about 5 minutes.

Apply and finish

Press in small amounts first to avoid trapping air, build up the repair and shape it. Once cured, sand and paint.

Full instructions and tools

Tools required:

- Routing tool to remove damaged timber
- Electronic moisture meter
- Mixing board
- Mixing knives / scrapers
- Extrusion tool
- Plastic cup (for Rebuild Stabiliser)
- Brush (for Rebuild Stabiliser)
- Rebuild Stabiliser
- Rebuild Resin of choice
- Sanding paper

Substrate Preparation

Carefully cut out and remove all soft, loose, and rotten timber. Make sure to remove all dust and debris before applying any wood stabilising solution to ensure a strong bond.

Application & Mixing

Mount the cartridge tube into the extrusion tool.

Remove the end cap and extrude the required amount of filler onto a mixing board.

Mix only the amount that can be used within the working time of approximately 5 minutes.

Using a putty knife or similar tool, mix with a folding action until the mixture is streak-free, ensuring the resin and hardener are thoroughly combined. Once the mixture is completely streak free, the product is ready for application.

Start by applying small amounts of filler to avoid trapping air within the repair.

Gradually build up the repair using larger volumes of filler.

Smooth over the surface to complete the repair and allow it to cure.

What else you'll need

A twin cartridge extrusion gun, a mixing board, mixing knives or scrapers and sandpaper. We recommend Evermend Stabiliser to prepare the timber, and gloves while you work.

How much will I need?Use our free Evermend calculator to estimate cartridges for your repair.Open calculator →

Specifications

Product data

ColourCream

Mixing ratio (resin to hardener)1:1 by volume

Working life5 minutes at 20°C

Cure time50 to 60 minutes at 20°C

Ready to sand and paintAbout 1 hour

Application temperature5 to 25°C

Application depth5 to 15mm

Mixed density1.40 g/cm³

Solids content100%

Volume400cm³ cartridge

Safety: this product is classed as an irritant. Wear gloves and protective clothing. If it gets on your skin, wash with soap and water, and seek medical advice if irritation develops.

Safety data sheet Base SDS Product data sheet

Ideal for

Window frames and sills
Door frames and architraves
Structural timber, decking, fascias and exterior joinery
Splits, spot repairs and splicing

Questions

Good to know

Do I need a gun?

Yes, cartridges go in a standard twin cartridge extrusion gun, which squeezes out both parts in the right amounts. You can buy the Evermend gun on its own or in a bundle. Prefer no gun? The Evermend self mix pot is mixed by hand.

Should I choose 1 Hour or 4 Hour?

Choose 1 Hour when you want to shape, sand and paint the same day. Choose 4 Hour when you want more time to work the filler. If you're unsure, give us a call and tell us about the repair.

Is it cheaper to buy in bulk?

Yes. Packs of 5, 10 and 20 cartridges cost less per cartridge, and there are bundles with a gun and stabiliser. See the best ways to buy Evermend.

Can I pick up in Sydney?

Yes, pick-up is free from our warehouse in Warriewood, just off Mona Vale Road. Choose Pick up at checkout and we'll message you the address when your order is ready.

Do you offer trade pricing?

Yes. Call us on 02 7228 0625 or see Trusted by the Trade.

Not sure it's right for your repair?

Send us a photo or give us a call and we'll help you choose the right product for the job.

Call us02 7228 0625

5 stars: 6 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Evermend 1 hour cure

I have used this product many times, i use it as an adhesive and also a timber repair/filler when appropriate. Its perfect for what i do and the quick cure time means i can finish shaping the parts ive glued in in an hour, not the next day! Even in a thin layer, it bonds well to the timber and stays there.

Really impressed

I'm used to using epoxy but previously used a different brand. This seems better consistency I will use this from now on. I'm in Tassie and I was surprised how quick it got to me. I'm converted from Timbabuild!

Amazing Product

This product is hands down the best thing I've ever used for timber repairs. So glad it finally came to Australia. Does not even compare to a standard builders bog. Will continue to use and highly recommend this filler to anyone dealing with any type of timber rot

Fast n Easy

For fast and strong adhesion in outdoor environments, the 1 hour is perfect. Think, short clamping time, fast fairing, and sanding within 60 minutes, priming, painting and done.

Evermend 1 Hour Epoxy

Evermend 1 Hour Epoxy is great for those fast timber fixes — consistently reliable and really effective. Lock and Latches’ delivery is always spot-on, fast, and hassle-free every time. Highly recommend!

Homeowners and tradies, Australia-wide

5.0Every review 5 stars on Google

★★★★★

Had eight sash windows in an old federation era home that needed an overhaul (all hardware replaced, rebalancing, draught sealing). We couldn't have been any happier than our choice to go with Lock and Latch. The quality of the products is great, and the pricing is very competitive (especially the draught seal kits).

Kathan Sethi · Local Guide

I initially purchased the Ecobead mouldings for a single double hung sash window I was restoring, and the result was excellent. The beading comes primed, and it is uncomplicated in terms of trimming up and modifying to suit. The draught proofing has been a success, and no more rattling either.

Michael

This product is fantastic! Ive used it many times now and it saves me so much time and hassle of splicing. Now I can do many repairs onsite instead of having to take windows back to the workshop to fabricate parts. Once dry, its more solid that the timber!

P A · Local Guide · Evermend 4 hour cure