
Why Evermend
Time to get the bigger repairs right
For larger, deeper or more complex repairs, the 4 Hour Cure gives you the working time you need. Build up deep fills, shape the repair carefully and get a clean finish without rushing. Like all Evermend, it bonds into the wood fibre rather than sitting on top.
Bonds into the wood
A structural bond, not just a surface fill.
Moves with the timber
Won't shrink, crack or absorb moisture.
Non-sag
Stays put on vertical and overhead repairs.
Work it like timber
Sand, drill, nail, screw and paint once cured.
How it compares: epoxy vs wood filler
1 Hour or 4 Hour?
Pick the cure time to suit the job
Same Evermend epoxy and the same gun. The difference is how long you have to work with it.
1 Hour CureFast cure. Shape, sand and paint the same day. Great for spot repairs, splits and quick jobs.
View the 1 Hour Cure →
4 Hour CureSlower cure, so you have more time to work the filler before it sets.
How to use it
Prepare, mix, apply
Full instructions are below, and we're happy to talk you through your first repair.
Prepare the timber
Cut out all soft, loose and rotten wood, then clear the dust. Brush on Evermend Stabiliser to seal and strengthen the timber.
Mix
Extrude onto a mixing board and fold together until it's streak-free. Only mix as much as you can use while it's still workable. Fold until the green colour fades and the mix is an even colour.
Apply and finish
Press in small amounts first to avoid trapping air, build up the repair and shape it. Once cured, sand and paint.
Full instructions and tools
What else you'll need
A twin cartridge extrusion gun, a mixing board, mixing knives or scrapers and sandpaper. We recommend Evermend Stabiliser to prepare the timber, and gloves while you work.
Specifications
Product data
Safety: this product is classed as an irritant. Wear gloves and protective clothing. If it gets on your skin, wash with soap and water, and seek medical advice if irritation develops.
Ideal for
- Larger rot repairs and deep fills
- Structural timber restoration
- Window frames, door frames, sills and fascias
- Any job where extra working time helps
Questions
Good to know
Do I need a gun?
Yes, cartridges go in a standard twin cartridge extrusion gun, which squeezes out both parts in the right amounts. You can buy the Evermend gun on its own or in a bundle. Prefer no gun? The Evermend self mix pot is mixed by hand.
Should I choose 1 Hour or 4 Hour?
Choose 1 Hour when you want to shape, sand and paint the same day. Choose 4 Hour when you want more time to work the filler. If you're unsure, give us a call and tell us about the repair.
Is it cheaper to buy in bulk?
Yes. Packs of 5, 10 and 20 cartridges cost less per cartridge, and there are bundles with a gun and stabiliser. See the best ways to buy Evermend.
Can I pick up in Sydney?
Yes, pick-up is free from our warehouse in Warriewood, just off Mona Vale Road. Choose Pick up at checkout and we'll message you the address when your order is ready.
Do you offer trade pricing?
Yes. Call us on 02 7228 0625 or see Trusted by the Trade.
Not sure it's right for your repair?
Send us a photo or give us a call and we'll help you choose the right product for the job.

