Evermend twin cartridge extrusion gun for epoxy wood repair

Evermend Twin Cartridge Extrusion Gun

Price
Regular price $55.00
Regular price Sale price $55.00
Save
/

A heavy-duty twin cartridge extrusion gun, designed for Evermend 1 Hour and 4 Hour cartridges. It squeezes out both parts in the right amounts, with smooth, controlled flow and minimal mess.

  • Fits Evermend cartridges
  • Precision geared trigger
  • Rear release valve
  • Easy to clean and reuse

*Colour may vary and may not be blue as pictured.

Will the gun I have be OK to use with Evermend?It depends on the brand. Contact us before you buy and we'll tell you. Call 02 7228 0625

Tax included. Shipping calculated at checkout.

Delivery Australia-wideShipping calculated at checkout

Free pick-up in Warriewood, SydneyWe'll message you the address when it's ready

Questions? 02 7228 0625Talk to us about your repair

SteelToughened buildSturdy and lightweight
GearedPrecision triggerSmooth, controlled flow
1 handOne-handed useKeep the other hand free
ReusableEasy to cleanUse it again and again
Built for Evermend cartridges

Why Evermend

Built for Evermend cartridges

Evermend cartridges hold the two parts separately. This gun pushes both out together in the right amounts, ready to mix on your board. The geared trigger keeps the flow smooth and controlled, and the release valve stops it running on when you let go.

Precision geared trigger

Smooth, effortless dispensing.

Rear release valve

Stops excess flow when you let go of the trigger.

Toughened steel

Sturdy but lightweight, for one-handed use.

Easy to clean

Reusable job after job.

How to use it

Load, dispense, clean

Full instructions are below, and we're happy to talk you through your first repair.

1

Load the cartridge

Press the clutch plate at the back and pull the pistons fully back. Slide the cartridge in, smaller tube first.

2

Dispense

Unscrew the end cap and squeeze the trigger to push the filler onto your mixing board. Wipe the nozzle and replace the cap.

3

Clean and store

Release the pressure, take out the cartridge and wipe the gun clean, ready for next time.

What else you'll need

Evermend 1 Hour or 4 Hour cartridges, a mixing board and mixing knives or scrapers. We recommend Evermend Stabiliser to prepare the timber.

How much will I need?Use our free Evermend calculator to estimate cartridges for your repair.Open calculator →

Specifications

Product data

Designed forEvermend 1 Hour and 4 Hour cartridges
BuildToughened steel, sturdy and lightweight
TriggerPrecision geared, for smooth dispensing
ReleaseRear release valve stops excess flow
UseOne-handed, easy to clean and reusable
ColourMay vary, may not be blue as pictured

Ideal for

  • Evermend 1 Hour and 4 Hour cartridges
  • Restorers and tradies doing repeat repairs
  • DIYers tackling more than one repair

Questions

Good to know

Will the gun I have be OK to use with Evermend?

There are a few different guns out there, and whether yours will work depends on the brand you have. Contact us before you buy and we'll be able to tell you if it will be OK. Call 02 7228 0625.

What colour is it?

Colour may vary, so it may not be blue as pictured. It works just the same whatever the colour.

Is there a bundle with cartridges?

Yes, the Cartridge & Gun Bundle includes the gun and 5 cartridges in 1 Hour or 4 Hour. See all saver packs and bundles.

Can I pick up in Sydney?

Yes, pick-up is free from our warehouse in Warriewood, just off Mona Vale Road. Choose Pick up at checkout and we'll message you the address when your order is ready.

Do you offer trade pricing?

Yes. Call us on 02 7228 0625 or see Trusted by the Trade.

Not sure it's right for your repair?

Send us a photo or give us a call and we'll help you choose the right product for the job.

Call us02 7228 0625
Related products