How it works
A seal for windows and doors that close
Compression weatherseal pushes into a groove routed in the frame or sash. When the casement window or door closes, the foam core compresses against it to block draughts and keep water out, then springs back when it opens.
It's made for surfaces that close and compress, not surfaces that slide. For double hung sash windows, use our timber brush seal instead.
Springs back to shape
A polyurethane foam core recovers after every close, through hot and cold weather.
Won't stretch or shrink
A polypropylene insert keeps the length stable, and the film is weather, UV, paint and stain resistant.
One continuous length
Supplied as a single piece of the length you order, so there are no joins for draughts to get through.
Which seal?
Brush seal or compression seal?
It comes down to whether your window slides or closes.
Timber brush seal with fin
For double hung sash windows, and hinged windows and doors with a 3 to 6.5mm gap.
- The sash slides against the brush
- The fin closes the gap
- Kerf slot 2.5mm wide
Compression weatherseal
For casement windows and doors that close against the frame, with a 4 to 7.5mm gap.
- The foam core compresses as it closes
- Not for sliding or sash windows
- Groove 2.7 to 3mm wide, in white or black
Draught proofing a sash window? Our draught seal beading comes with the brush seal already fitted, so there's no slot to cut. Or read compression seals vs brush seals.
Fitting
Fit it in four steps
Call us if you'd like to talk it through first.
Check the gap
Measure the gap (4 to 7.5mm) and decide on a rebated or flush fit.
Cut the groove
Route a groove 2.7 to 3mm wide and 6mm deep, then clean out the dust.
Cut and push in
Cut to length, mitre the corners and push the foot firmly into the groove.
Face it right
Face the "V" away from the outside edge so water can't collect, then check it closes smoothly.
Specifications
Product details
Questions
Good to know
How much do I need?
Measure all the way around the opening where the seal will go, add a little for cutting, and order that length. You'll receive it in one continuous piece.
Can I use it on a sash window?
We don't recommend it. Compression seals are made for windows and doors that close against the frame. Sliding sashes drag on them and wear them out. Use our timber brush seal instead.
How does delivery work?
Seals ship Australia-wide for a flat $19.95. Or pick up free from Warriewood in Sydney, and we'll message you the address when your order is ready.
I need a lot, or I'm a tradie
Call us on 02 7228 0625 for bigger orders and trade pricing.
Not sure which seal you need?
Send us a photo of your window or door, or give us a call. We'll help you choose.